Sticker for mailbox front
Pattern: Puppy, Bulldog
NB: For technical reasons (photographic and computer-related), the actual appearance of the products may sometimes differ slightly from the photographs presented on the Website.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (name location), then you can cut out these locations on the sticker with scissors or a utility knife.
Peel the pattern from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by expelling the air from the center outwards (use a soft cloth).
Small tip: If small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with household alcohol.
