Sticker for mailbox front
Design: puppy, dog, Doberman
Note: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Site.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The temperature of the surface should be between 10°C and 30°C.
Wash and dry your surface before application. We recommend cleaning the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (name slot), then you can cut out these areas on the sticker with scissors or a utility knife.
Peel the design from its backing.
Position the sticker; once the final placement of your sticker is chosen, stick it by pushing out the air from the center outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer, which will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
