Sticker for mailbox front
Design: puppy, dog, dalmatian
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Site.
Installation Advice
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (nameplate location). You can then cut these locations on the sticker with scissors or a utility knife.
Peel the design from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by pushing out the air from the center outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently prick them with a thin needle.Removal
The sticker has a permanent adhesive, however, it can be removed if needed.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
