Sticker for mailbox front
Design: puppy, dog, dalmatian
NB: For technical reasons (photographic and computer-related), the actual rendering of the products may sometimes differ slightly from that of the photographs presented on the Site.
Installation Advice
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C
Wash and dry your surface before application. We recommend cleaning the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits)
Remove the lock and the plastic plate (name plate), then you can cut out these areas on the sticker with scissors or a utility knife.
Peel the design from the backing
Position the sticker, once the definitive location of your sticker is chosen, stick it by chasing the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, however, if needed, it can be removed.
Method: Heat the surface with a hairdryer, this will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
