Sticker, decal, for mailbox front
Pattern: puppy, dog, pug
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from the photographs presented on the Site.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (do not use greasy solvents such as denatured alcohol)
Remove the lock and the plastic plate (name location), then you can cut these locations on the sticker with scissors or a utility knife.
Peel the design from the backing.
Position the sticker; once the final location of your sticker is chosen, apply it by pushing the air out from the middle outwards (use a soft cloth).
Little tip: if small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hair dryer; this will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
