Mailbox front sticker
-
- Dimensions: 28x28 cm, rounded corners
- This sticker is covered with a transparent protective laminate specific for outdoor environments, resistant to bad weather, UV rays and washing.
- Appearance: glossy
- This sticker is designed to fit all standard and regulated mailboxes.
- Applied according to our recommendations, we guarantee this sticker for 5 years.
- Item manufactured to order, manufacturing, packaging and shipping time: 7 working days
- All our stickers are designed and manufactured in Nice, France.
Installation Advice
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits)
Remove the lock and the plastic plate (name location) then you can cut these locations on the sticker with scissors or a cutter.
Peel off the design from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by pushing out the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear, despite everything, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hair dryer; this will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
