Sticker for mailbox front
Design: Postage Stamps
NB: For technical reasons (photographic and computer-related), the actual rendering of products may sometimes differ slightly from the photographs presented on the Website.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The temperature of the surface must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (name location), then you can cut out these locations on the sticker with scissors or a utility knife.
Peel the design from its backing.
Position the sticker; once the final location of your sticker is chosen, stick it by chasing out the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if needed.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with household alcohol.
