Sticker for mailbox front
Pattern: Letter, 3 sheets
Note: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Site.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use fatty solvents such as denatured alcohol).
Remove the lock and the plastic plate (name slot), then you can cut these slots on the sticker with scissors or a cutter.
Peel the pattern from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by expelling the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hair dryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
