Sticker for mailbox front
Design: Letter, writing
NB: For technical reasons (photographic and computer), the actual rendering of products may sometimes slightly differ from that of the photographs presented on the Site.
Application Advice
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (nameplate location). You can then cut these locations on the sticker with scissors or a utility knife.
Peel off the design from its backing.
Position the sticker. Once the final location of your sticker is chosen, stick it by chasing the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear anyway, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive; however, if needed, it can be removed.
Method: Heat the surface with a hairdryer, this will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
