Sticker for mailbox front
Design: Bat
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Site.
Installation Tips
-
For perfect adhesion, the support must be dry and clean.
The temperature of the support must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use greasy solvents such as methylated spirits)
Remove the lock and the plastic plate (name location), then you can cut out these locations on the sticker with scissors or a cutter.
Peel the design from the backing.
Position the sticker; once you have chosen the final location for your sticker, stick it on, pushing out the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive; however, if needed, it can be removed.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
