Sticker for letterbox front
Design: puppy, dog
Note: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Website.
Installation Tips
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (name slot), then you can cut these slots on the sticker with scissors or a utility knife.
Peel the design from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by pushing the air out from the middle towards the outside (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with household alcohol.
