Sticker for mailbox front
Design: Puppy, dog, Collie
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Website.
Application Tips
-
For perfect adhesion, the surface must be dry and clean.
The temperature of the surface must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use a greasy solvent such as rubbing alcohol)
Remove the lock and the plastic plate (name slot), then you can cut out these slots on the sticker with scissors or a cutter.
Peel off the design from the backing.
Position the sticker; once the final location of your sticker is chosen, stick it by pushing out the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear anyway, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer; this will soften the glue and the sticker will peel off easily. Then remove any residue with household alcohol.
