Sticker for letterbox front
Design: Writing Desk, Letter, Writing
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes slightly differ from that of the photographs presented on the Site.
Installation Tips
-
For perfect adhesion, the surface must be dry and clean.
The temperature of the surface must be between 10°C and 30°C
Wash and dry your surface before application. We recommend cleaning the surface with household alcohol (do not use greasy solvents such as methylated spirits).
Remove the lock and the plastic plate (name slot), then you can cut out these slots on the sticker with scissors or a cutter.
Peel the design from the backing paper.
Position the sticker; once the final location of your sticker is chosen, stick it by pushing the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear anyway, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive; however, it can be removed if necessary.
Method: Heat the surface with a hairdryer; this will soften the glue, and the sticker will peel off easily. Then remove any residue with household alcohol.
