Sticker for mailbox front
Design: puppy, dog, pinscher
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Site.
Application Advice
-
For perfect adhesion, the surface must be dry and clean.
The surface temperature must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with household alcohol (Do not use greasy solvents such as methylated spirits)
Remove the lock and the plastic plate (nameplate) then you can cut out these areas on the sticker with scissors or a cutter.
Peel the design from the backing paper
Position the sticker, once you have chosen the definitive location for your sticker, stick it by chasing the air from the middle outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently prick them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer, this will soften the glue and the sticker will peel off easily. Then remove any residue with household alcohol.
