Sticker for letterbox front
Design: Steam Tricycle
NB: For technical reasons (photographic and computer), the actual appearance of the products may sometimes differ slightly from that of the photographs presented on the Website.
Application advice
-
For perfect adhesion, the surface must be dry and clean.
The temperature of the surface must be between 10°C and 30°C.
Wash and dry your surface before application. We advise you to clean the surface with rubbing alcohol (Do not use fatty solvents such as methylated spirits)
Remove the lock and the plastic plate (nameplate location). You can then cut these locations on the sticker with scissors or a cutter.
Peel the design from the backing paper.
Position the sticker. Once you have chosen the definitive location for your sticker, stick it on, smoothing out the air from the center outwards (use a soft cloth).
Small tip: if small air bubbles appear despite everything, gently pierce them with a fine needle.Removal
The sticker has a permanent adhesive, but it can be removed if necessary.
Method: Heat the surface with a hairdryer; this will soften the glue and the sticker will peel off easily. Then remove any residue with rubbing alcohol.
